Luminex IS Version 2.3 (IVD) Manuale Utente Pagina 44
- Pagina / 116
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Luminex IS Software Manual for Version 2.3- For In Vitro Diagnostic Use xMAP Technology
34
• DSP capture test
• High voltage module
• Channel backgrounds test
• Pressurization test
• Actuator test
• Syringe pump test
• Backflush valve test
• Debubbler valve test
Show Bead After selecting an entry from the drop-down list, sets the histogram
to show events for only one beadset [bead set number], <all gated>
events within the gate, or <all> events inside and outside the gate.
Select <all> (default) before setting the gate.
Single Step Selecting this option on the toolbar pauses the system in between
each command or sample acquisition within a batch.
Skip [wells] Enables you to deliberately bypass specific wells during batch
acquisition.
Soak Prevents salt crystals from forming in the probe due to air exposure.
Soaking the probe replaces sheath fluid in the probe with water. You
should perform the soak function at the end of each day. The system
uses at least 250
µL of distilled water.
Start Analysis Opens the Open Batch dialog box, from which you select a batch to
analyze. Once you select the batch, the Analysis window opens.
Start (Plate) This command initiates data acquisition on New Advanced Batches
and New Batches using system templates. During acquisition, the
system draws sample from the microtiter plate for processing.
Statistics This command enables you to display selected statistics for sample
data. There are eleven different statistics: %CV, Trimmed %CV,
Count, Trimmed Count, Mean, Trimmed Mean, Median, Trimmed
Peak, Peak, Trimmed Std Dev, and StdDev.
Test Sort Orders This command is in the Data Export Tab of the Options tab. You can
select Alphabetical by test name, Sequential by Region ID, or by
Template Setup Order
• Alphabetical by Test Name - the tests are sorted by
alphabetical order
- Luminex® IS 1
- Software Manual For 1
- Version 2.3 1
- Bergerweg 18 2
- 6085 AT Horn 2
- The Netherlands 2
- EULA PN: 89-30000-00-070 6
- Contents 7
- PN 89-00002-00-254 Rev. B ix 9
- Luminex 2.3 Software 11
- PN 89-00002-00-254 Rev. B 3 13
- PN 89-00002-00-254 Rev. B 5 15
- 3. Command List 16
- Figure 4 Run Batch Tab 16
- PN 89-00002-00-254 Rev. B 7 17
- Figure 7 Maintenance Tab 18
- PN 89-00002-00-254 Rev. B 9 19
- PN 89-00002-00-254 Rev. B 11 21
- Acquisition Detail 22
- PN 89-00002-00-254 Rev. B 13 23
- Figure 15 System Status Bar 27
- Diagnostics tab 28
- Disconnected 29
- Secondary 30
- PN 89-00002-00-254 Rev. B 21 31
- PN 89-00002-00-254 Rev. B 23 33
- Figure 19 Competitive Assay 36
- Replicate 37
- Averaging 37
- PN 89-00002-00-254 Rev. B 29 39
- PN 89-00002-00-254 Rev. B 31 41
- PN 89-00002-00-254 Rev. B 33 43
- PN 89-00002-00-254 Rev. B 35 45
- Define General 47
- Tab Information 47
- Define Company 48
- Information Tab 48
- Define Data Export 49
- Setting up the Favorites 50
- Startup Procedures 51
- Set Luminex XYP 53
- Instrument Heater 53
- Temperature 53
- Run System xMAP 54
- Calibrators 54
- PN 89-00002-00-254 Rev. B 45 55
- Controls 56
- PN 89-00002-00-254 Rev. B 47 57
- PN 89-00002-00-254 Rev. B 49 59
- C:\Program 59
- PN 89-00002-00-254 Rev. B 51 61
- PN 89-00002-00-254 Rev. B 53 63
- The Open Batch 64
- Create a Multi 65
- Open a Multi 66
- To open a multi-batch: 66
- Process Multiple 67
- PN 89-00002-00-254 Rev. B 59 69
- To edit a patient list: 70
- Assign Sample 71
- Dilution Factors 71
- PN 89-00002-00-254 Rev. B 63 73
- Edit Lot 74
- Information on an 74
- Unused Template 74
- Information on a 75
- Used Template 75
- Analyzing Batches and 77
- Multi-Batches 77
- Luminex does not 78
- Analysis while the Luminex 78
- System is performing data 78
- PN 89-00002-00-254 Rev. B 69 79
- PN 89-00002-00-254 Rev. B 71 81
- Enable Automatic 83
- Analysis 83
- Validating or 85
- Invalidating 85
- Standards and 85
- Running Reports and 87
- Analyses 87
- PN 89-00002-00-254 Rev. B 79 89
- Print Data 90
- Analysis Report 90
- Database Management 91
- Procedures 91
- To drain the system: 94
- Run Self 94
- Diagnostics 94
- To run self diagnostics: 94
- To perform a disk cleanup: 95
- Using the Cleanup 95
- Daily Shutdown 96
- PN 89-00002-00-254 Rev. B 87 97
- Glossary 99
- PN 89-00002-00-254 Rev. B 91 101
- Output.CSV 103
- Field Definitions 104
- Statistic Description 106
- Statistics Column 107
- Definitions 107
- Column Name Description 108
- Index-2 116
Prodotti e manuali riguardandi Apparecchiature Luminex IS Version 2.3 (IVD)
(10 pagine)
(58 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 3.333 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale